Fusion splice protection sleeves
ADTEK's fiber fusion splice protection sleeves match the industry's most popular sleeves with
its robust design and user friendly size.Most commonly used length are 45mm and 60mm
with an after shrink diameter of 3.0mm and will accommodate fiber diameter up to 1.4mm.
This product is constructed with an inner EVA meltable adhesive tube,stainless steel
strenth member and a polyolefin heat shrink outer tube. The tubes are transparent color
to allow viewing the color of the fiber after splicing.The entire assembly is heat bonded to
ensure that all members maintain perfect alignment during shipping,handling and shrinking.
its robust design and user friendly size.Most commonly used length are 45mm and 60mm
with an after shrink diameter of 3.0mm and will accommodate fiber diameter up to 1.4mm.
This product is constructed with an inner EVA meltable adhesive tube,stainless steel
strenth member and a polyolefin heat shrink outer tube. The tubes are transparent color
to allow viewing the color of the fiber after splicing.The entire assembly is heat bonded to
ensure that all members maintain perfect alignment during shipping,handling and shrinking.
Features:
Bellcore GR-1380 Compliant
RoHS Compliant
Outer tube meets SAE AMS-DTL-23053/5 Class 2
Inner EVA meltable adhesive tube
Full length strength member for total fiber support
Close diamensional tolerances
Heat bonded assembly
Open ended assembly minimizing possibility of air entrapment during shrinkage
Bellcore GR-1380 Compliant
RoHS Compliant
Outer tube meets SAE AMS-DTL-23053/5 Class 2
Inner EVA meltable adhesive tube
Full length strength member for total fiber support
Close diamensional tolerances
Heat bonded assembly
Open ended assembly minimizing possibility of air entrapment during shrinkage
Portuguese
German
French
Italian
Arabic
Turkey